Seamless bathroom or walk-in shower

How to waterproof highly absorbent or porous substrates such as wood, Gyproc, plaster or basement walls that are still to be painted?

You can waterproof damp floors and interior walls with the G4 sealer. This is easy to apply with a brush or roller to the even still damp substrate. Afterwards, it can be painted over with any wall paint. If you need to reinforce the substrate, you can use polyester reinforced with glass fibre. This will give you a seamless covering. If you are looking for a UV-resistant solution, you can use the 1- or 2-component paint, which we can supply in any colour.

How to fill, reinforce and repair wood rot in wet areas?

V11 filler

Affected and damaged wood can be easily repaired by sealing the wood and filling the holes and pits with a fibre reinforced paste such as V11. You can then finish this off with an epoxy filler.

How to seal soot after removing a fireplace?

Epoxy Primer Fast

Here you need to use a sealing coat or an anti-rust primer type Epoxy Primer Fast. This coating has sealing properties to stop the black soot from coming through and then you can paint over it or finish off your seamless bathroom with polyester and fibreglass.

How to elastically joint seams and cracks in your bathroom?

PUR Uniflex

With the elastic jointing kit Uniflex you can easily seal all seams and joints. This is a handy polyurethane sealant with filling properties. This product is permanently elastic and can be painted over with any type of paint. Uniflex can also be used to seal the joint between two materials with a different coefficient of expansion.

How to improve the adhesion of Uniflex on problematic substrates?

G4 Primer

Here we recommend using the G4 primer, this 1-component PU primer reacts to the humidity present in the substrate. Thanks to the G4 primer, the Uniflex sealant will adhere even better. Especially on damp or extremely porous substrates.

How to waterproof stone or concrete?

G4 Sealing

For waterproofing your floor or wall we recommend the G4 sealer.

The advantages of PUS G4:

Convenient 1 component
Seals and fixes dust
Reacts to air humidity and any remaining moisture in the substrate
Makes it perfectly waterproof
Can be painted over with any kind of paint

How to waterproof all kinds of substrates?

Surester® resin

You can use a 2-component solvent-free coating for painting an elastic coating to protect all kinds of substrates against the penetration of water or moisture. It makes everything perfectly waterproof and can be painted over with all types of building paints.

How to protect wood and make it waterproof?

G4 Sealer

Epoxy Light Primer

Use G4 sealer, which is a wear-resistant varnish and sealant for wood that is resistant to most diluted acids and alkalis used in the building industry and especially in wet areas, showers and basements. You can also use an epoxy primer for various substrates. This quick-drying 2-component primer or adhesion primer Light Primer is based on epoxy and therefore has a more filling effect to fill up unevennesses, for example for the treatment of mf, wood and scaffolding wood.

How to waterproof gypsum boards?

Here we recommend using G4 sealer, a thin liquid 1-component varnish. Has excellent adhesion to most common substrates such as Knauf or Gyproc boards. Can be painted over afterwards with all types of paint.

Do you need to repair a hole in plasterboard quickly? Then use the V11 fibre-reinforced putty and the FEW finishing putty to finish. If you prefer to work with a 1-component product, we suggest the Acrylic Putty.

How to repair and fill damaged wood constructions?

Universal Filler

Epoxy BK

Glass fabric 160 gr/m²

Aerocell

By using the universal filling and finishing putty, Universal Filler on the basis of epoxy, you repair wood constructions quickly and efficiently. This 2-component filler can be applied on almost every type of wood, both indoors and outdoors. Do you want to reinforce it? Then we recommend strengthening with the thin liquid Epoxy BK in combination with the 160 gr/m² glass fabric. This 2-component resin can be applied with or without glass fibre. For application without glass fibre, this resin can also be poured. This with the possible addition of dry filler such as wood flour or Aerocell.